Lt-security CMD728H Manuel d'utilisateur télécharger pdf

INSTRUCTION MANUAL

MODEL NO.

CMD728H

FEATURES

◆1/3” SONY SUPER HAD CCD

◆680 TVL

◆0 LUX (WITH IR LED ON)

◆12V DC

◆2.8-10MM Manual-Iris Lens

◆METAL TRUMPET SHELL CAMERA

SPECIFICATIONS

INSTALLATIO

Camera Mounting and Connections:

Read following installation precautions

before installing and using system.

1) Check the system for operation prior

to installing the system.

2) Identify and evaluate an ideal location

in the ceiling for mounting the

camera.

3) Separate the mounting case from the

camera and its dome cover.

4) Cut a hole in the roof which is big

enough for routing the cables.

5) Align the mounting case over the

surface of the cable hole and make

marks on the ceiling where screw

holes to be drilled and then drill the

four holes.

6) Pass the power cable and video

cable from the camera unit through

the cable hole in the ceiling.

7) Align the four screw holes in the

mounting base ring with screw holes

in the ceiling, and then secure the

mounting case and camera in place

by tightening four screws

8) Attach the dome cover to the camera

and mounting case to fix the camera

position.

9) Carry out the setting and adjustments

to the camera.

10) Loosen dome cover to adjust

camera’s panning and tilt position.

11) Set the zoom position by using zoom

lever screw.

12) Set the focus by using focus lever

screw.

13) Connect the video output cable of the

camera to the video input of a

monitor, TV, DVR or other equipment.

14) Connect the DC power cable to a 12V

power supply unit.

Camera Front View

Camera Side View

Camera Bottom View

Connection Cables

SAFETY WARNING

CAUTION

DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

PRODUCT PRECAUTIONS

1. All the safety and operating instructions should be read before the

camera is operated.

2. All warnings on the camera and in the instruction should be adhered to.

3. Handle the camera with care. Avoid striking or shaking it. Imprope

handling or storage could damage the camera.

4. Never aim the camera at direct sunlight or at other intense light source

which could damage the image sensor and create adverse video.

5. Do not operate the camera beyond its specified temperature, humidity

and power source ratings. The operational temperature range for this

indoor/outdoor use camera is between -10°C ~ 50°C and relative

humidity below 85%.The input power source voltage and electric

current must match within the limits of camera’s operating voltage

specification.

6. Use dry cloth or mild detergent to clean housing when dirty. Unplug

power source before cleaning

7. Only use attachments/accessories specified by the manufacturer.

8. Do not let water or foreign objects inside the camera as it may result

fire or electric shock.

9. Refer all servicing to qualified personnel. Attempting to remove the

covers or disassemble the product, could expose you to dangerous

high voltage points.

PACKAGE CONTENTS

1. Cameras body of the subject model.

2. Video and power cable are connected to the camera

3. Mounting base ring, extension rings and screws

4. Instruction Manual

INSTALLATION PRECAUTIONS

1. The installation should be made by qualified service personnel and

should confirm to all local regulatory codes.

2. To make a hole on the wall to hide connecting cables, ensure that no

service cables, water or gas pipes are buried in the wall before

drilling.

3. Select the location where the camera weight can be properly

supported and firmly attached the bracket to plywood, gypsum

board or plaster board.

4. Avoid the following location for camera installation:

a) Near an object that releases a strong magnetic or electric field

b) Areas with strong vibrations

5. Incorrect cable connection may cause short circuit, fire or

malfunction and even damage the camera

6. Combined weight of any camera, lens and housing must not exceed

9 lbs.

TROUBLE SHOOTING

No video image appears

1. Is the video cable connected correctly?

2. Are power source and supply connected correctly?

3. Is the iris of the lens inside the camera set correctly?

4. Is there sufficient illumination?

Poor image quality

1. Is the lens out of focus?

2. Is the lens dirty?

3. Is the monitor setup correctly?

COMPLIANCE DECLARATION

This device has been tested and found to comply with the limits for a CE

Class B digital device.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

To assure continued compliance follow the attached installation

instructions and do not make any unauthorized modifications.

WARRANTY

The user’s warranty will not apply if your serial number has been removed

or if the product has been tampered with, disassembled or damaged by

misuse, accident, modification or unauthorized repair.

NOTE: Design and specifications are subject to change without

notice. “SONY” is a registered trademark of Sony Corporation, and

mentioned herein as for identification purpose only.

1 2

INSTRUCTION MANUAL 1

Résumé du contenu

Page 1 - INSTRUCTION MANUAL

INSTRUCTION MANUAL MODEL NO. CMD728H FEATURES ◆1/3” SONY SUPER HAD CCD ◆680 TVL ◆0 LUX (WITH IR LED ON) ◆12V DC ◆2.8-10MM Manual-Iris Lens ◆METAL

Page 2

Commentaires sur ces manuels

Pas de commentaire

Lt-security CMD728H Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Caméscopes Lt-security CMD728H. LT Security CMD728H User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Caméscopes Lt-security CMD728H